UHU Original All Plastic Glue 33ml

UHU All Plastic Glue Original - Resistant against Water/Oil/Alcohol (33 ml )

Features:

⁃ Forms a hard but flexible adhesive bond with a thermoplastic character

- Resistant from -30°C to approx. +90°C

⁃ Resistant against water, oil and alcohol

SUITABLE FOR:

Suitable for bonding numerous types of plastics suck as polystyrene and high impact polystyrene types (ABS SAN. SB. ASA). PVC hard

Also glues materials such as wood, paper, cardboard,leather, metals, glass, ceramics

NOT SUITABLE FOR

Not suitable for polyamide (PA), acetal resin

(POM) polyethylene (PE), polypropylene (PP)

polytetrafluoroethylene (PTFE), silicons (Si)

Styropor@ and not suitable for leather used for clothing

BEFORE USE:

It contains volatile, highly flammable solvents. Therefore corresponding safety measures should be taker regarding processing and storage

The surface must be dry. clean and free of dust and grease.

DURING USE:

Depending on the specific requirement, one or both of the parts to be connected are spread with adhesive and joined together immediately. An initial bond strength is attained after 5 - 10 minutes. The high bond strength of UHU allplast on plastics is attained by slightly dissolving the surface of the plastic material. For this reason, the adhesive should only be applied in small quantities on low caliper plastics

AFTER USE:

Adhesive residues and stains can be removed with acetone or thinner for nitrocellulose lacquer

Store in tightly closed packaging in a dry, cool and frost-free place